Best Upholstery Gun Reviews

Best Upholstery Gun Reviews

Repairing worn out chairs and carpets can be fun when you have the right tools. A staple gun is essential in such projects because it makes the work much easier. The good thing is that driving staples into wood, leather, or fabric doesn’t damage the material.

In fact, it will make your chairs and other household furniture look like they have been repaired by an expert. Even wall-to-wall carpets can be installed by an upholstery stapler. Staples are better suited to this than other methods because they reduce the chances of splitting the materials that you’re bonding due to their relative thinness.

With a staple gun, the chances that you will injure yourself are very low. If the staples don’t go in properly, you can pull them out with a staple remover. Staple guns are made to last. Their metallic casing means that they are not affected by rusting. Most home owners buy a new staple gun only because they want to upgrade to a more recent model.

How to Choose the Best Upholstery Gun

There are many upholstery guns on the market but only a few of them are worth it. You should go for a gun made by a reputable manufacturer. However, you should consider your budget, because some high end staple guns can be very pricey.

The best upholstery guns have variable staple depth, as you might need to increase or reduce the depth of the staples depending on the material that you are working with. If you want to drive the staples deeper into the material, you should choose a stapler that uses long staples. Long staples enable the bonding of thicker materials.

There are three types of upholstery gun. The first type runs on a compressor, while the second type is powered by electricity. The third type requires batteries to function. An upholstery stapler that requires a compressor is also known as a pneumatic stapler and is the most common type, which is why it’s usually cheaper. Electric staple guns are expensive but very powerful.

What to Look for in a Upholstery Gun

When shopping for an upholstery stapler, you should choose one that has a safety lock. This helps ensure that no staples are fired accidentally. You should also check whether the handle is textured or padded.

If the handle is smooth, there is a risk that the stapler will slip while you are in the middle of a task.It is important to consider whether the trigger is ergonomically designed to be within the reach of the user. It’s also important to go for a staple gun that has a high magazine capacity.

If the magazine has a low capacity, you will have to reload it frequently to avoid running out of staples. Some models of staple gun come with an indicator that lets you see the staples while you work. It’s also recommended that you go for a staple gun that has a rear exhaust vent.

Image

Product

Price

Rating

  Bostitch 216 71 upholstery Stapler Crown  $$  5/5
  Porter Cable US58 22 Gauge C Crown Upholster  $$  4.8/5
  Surebonder 9615A Upholstery Stapler Carrying  $  4.4/5
  Fasco 7C 16 Fine Wire Stapler  $$  4.1/5
  BeA 71/16 421 Fine Wire 22 Gauge Stapler  $$  5/5
  Unicatch USC 71 16 US2238A  $  5/5
  SENCO 6S0021N SFT10XP C, 3/8 in 22 Gauge Fine Wire Stapler  $$$  4.7/5
  BeA 92/25 553 18 Gauge Stapler for 92 Series Staples  $$$  5/5
  Unicatch USC71 16L US2238AL Upholstery  $  4.2/5
  Omer 3G Upholstery Stapler Crown  $$  5/5

Wen Narrow Crown Stapler

With this staple gun, there is no limit to what you can fasten. The equipment is perfect for bonding wood, leather, plastic and fabric.  The handle has a rugged shape to prevent slipping. The staple gun is powered by a compressor, and it has an exhaust port at the back that protects the user from dust and other pollutants.

If the equipment gets jammed, open the magazine chamber to solve the problem.Reloading the magazine is very easy. The magazine can carry 185 staples, and the trigger is conveniently placed within the reach of the user.

All you need to operate the staple gun is a compressor that offers 70 to 120 PSI of air pressure. The deal is ensured by a limited one year warranty. You can therefore return the staple gun to the dealer if it stops functioning within the valid period of the warranty.

The Wen staple gun is covered with a steel cap,which keeps it in good shape. It supports staples that range from 3/8 inch to ¼ inch in size. You can use this staple gun for many hours without getting tired because it’s made from light materials, which makes it easy to move it from one work station to another.

The nozzle of the stapler has been extended one inch, which allows the user to drive staples into areas that are difficult to reach.

Features:

  • Powered by compressor
  • Steel housing
  • Limited time warranty
  • Supports 22 gauge staples
  • 3/8 to ¼ inch staples

Benefits:

  • 70 to 120 PSI air pressure
  • Rear exhaust port
  • Rugged handle
  • Extended tip
  • Easy to reload
  • Jam release system

Things to be Aware of:

  • No carrying case
  • No staple indicator

Verdict:

The Wen Narrow Crown Stapler is a game changer. With a 1 inch extension nozzle, there is no place that’s out of reach. You will never have to worry about jams again as the staple gun unlocks them by moving the driver guide backwards. No matter how big your project is, this staple gun has all the features that you need.

As long as you connect the staple gun to a compressor that has the capacity to pump 70 to 120 PSI of air pressure, you are good to go. The staple gun has a long power cord that allows you to go far and wide without being limited by distance.

BOSTITCH EHF1838K Upholstery Stapler

The Bostitch EHF1838K Upholstery Stapler supports staples that are 5/16 to 7/16 inches long. One of its advantages is that you can configure the depth of the staple without using any tools.

This feature has been included because there are instances when driving the staple too deep can damage the material. On the contrary, there are other jobs that require you to drive the staple deep into the material, and that’s when staple depth adjustment comes into play.

The gun has a staple chamber that separates the staples that have been inserted into groups of 100. Reloading the staple gun is simple because you need only open the top cover of the staple compartment. The staple gun has an ergonomic design that allows you to hold the handle in alignment to the working surface. The handle is padded and rugged to avoid slippage while you are in the middle of a task.

With this staple gun, you can drive staples for protracted periods of time without experiencing fatigue because it only weighs 3.5 pounds. Since it supports fine staples, you can use it to join thin sheets of wood, leather and fabrics. It’s a great tool for carrying out minor repairs. With this piece of equipment, your household furniture and other items will have a second chance.

Even plastic materials can be fastened using this staple gun. The muzzle of the gun is extended to enable you to drive staples into areas that are hard to reach. The staple gun comes with a security lock that prevents unwanted starts.

It also comes with a mechanism for removing jammed staples. Dust and debris will not be an issue, because the staple gun has rear exhaust ventilation. The trigger is conveniently placed so that you can pull it while holding the handle.

Features:

  • Non-slip handle
  • Accepts 7/16 to 5/16 inch long staples
  • Staple compartment loads in series of 100
  • Compact design
  • Conveniently placed trigger

Benefits:

  • Easy to reload
  • Extended muzzle
  • Light-weight
  • Ergonomic design
  • Adjustable staple depth
  • Safety lock
  • Rear exhaust vent
  • 7 years warranty

Things to be Aware Of:

  • No staple indicator
  • Requires compressor

Verdict:

The Bostitch EHF1838K Upholstery Stapler is a great upholstery tool. Whether you are working on carpets, plastic, leather, or wood, it will not disappoint you. Even jams can’t stop you, because they are cleared as soon as they occur. With this staple gun, there is no excuse for throwing away your worn out furniture, as you can repair it with ease. You can set the depth of the staples so that they don’t exceed your preferred depth.

Paslode S200-S16 Framing Stapler

The Paslode S200-S16 Framing Stapler is very easy to transport from one work station to another thanks to its light-weight metallic construction. The stapler is built to last, which makes it economical in the long run. The motor is designed to function without requiring routine maintenance. The staple gun comes with an exhaust, which is at the rear of the body.

This helps to ensure that the stapler does not take in dust and debris from the working environment. With this staple gun, you will rarely experience accidental firing, as it’s fitted with a lock for stopping the trigger when the equipment is not in use.

With this staple gun, you will be able to drive hundreds of staples into multiple materials without experiencing any breakdowns. If by chance they do occur, there is a mechanism for dealing with them instantly so that you can continue working without being affected by any delays. The staple gun has the capacity to hold up to 71 staple series with a 1/2 inch crown width and a magazine capacity of 196. This allows you to bind objects without worrying that you will run out of staples.

Even if you do run out, the staple gun comes with a quick loading chamber.  The staple gun allows you to vary the depth of the nails without using any additional tools. Once the depth has been set, the staples will not exceed the predefined depth. You can therefore use the equipment on less robust surfaces without needing to worry about damaging them.

Features:

  • Body made from metal
  • Rugged handle
  • Requires minimum strength
  • No jamming problems
  • Zero maintenance
  • Ergonomic design

Benefits:

  • 1/2 inch crown
  • 71 series staples
  • 1 year warranty
  • Light weight
  • Multiple sizes of staples
  • Adjustable staple length
  • Trigger lock

Things to be Aware Of:

  • No staple indicator
  • Expensive

Verdict:

You have to get your hands on the Paslode S200-S16 Framing Stapler. This staple gun has an ergonomic design that allows you to drive staples from any angle. Working with this stapler improves productivity and allows for a high rate of stapling due to a magazine capacity of 196 staples. The stapler can withstand maximum strain, as it is made from high quality metal. This stapler is built to last.

Unlike other motors that require regular greasing, the Paslode S200-S16 Framing Stapler functions well, and does not need to undergo maintenance. The staple gun supports a wide array of staple wires under 1/2 inches. Injuring yourself or other people by unwanted firings is almost impossible, as the gadget is fitted with a safety lock. With this staple gun, you can drive staples as deep as you want, as it is fitted with a dial for reducing the staple depth.

Max Medium Crown Stapler

The Max Medium Crown Stapler is powered by a compressor and has an exhaust port at the back that protects the user from dust and other pollutants. If the staple gun gets jammed, simply open the magazine chamber and the problem will be solved immediately. Reloading the magazine is very easy. The trigger is conveniently placed within the reach of the user.

All you need to operate the staple gun is a compressor that provides from 70 to 120PSI air pressure. The deal is secured by a limited one year warranty. You can therefore return the staple gun back to the dealer if it stops functioning normally within the valid period of the warranty.

With this staple gun, there is no limit to what you can fasten. The equipment is perfect for bonding wood, leather, plastic and fabric.  The handle has a rugged shape, to prevent slipping. The staple gun is covered with a steel cap, which keeps it in good shape. It supports staples ranging from 7/16 inches.

You can use this staple gun for extended periods of time without getting tired, as it’s made from light-weight materials. It also has a compact design that makes it easily transportable. The nozzle of the stapler is extended 1 inch away from the body, in order to enable the user to drive staples into areas that are hard to reach.

Features:

  • Powered by compressor
  • Steel cap
  • 1 year warranty
  • Supports 22 gauge staples
  • 7/16 inch staples
  • 185 staples

Benefits:

  • 70 to 120 PSI air pressure
  • Rear exhaust port
  • Rugged handle
  • Extended tip
  • Easy to reload
  • Jam resistant

Things to be Aware Of:

  • No staple indicator
  • Requires compressor

Verdict:

Max Medium Crown Stapler is a game changer. With a 1 inch extension nozzle, there is no place that’s out of reach. You will never have to worry about jams again, as the staple gun unlocks them by moving the driver guide backwards.

No matter how big your project is, this staple gun has all the features that you need. As long as you connect the staple gun to a compressor that has the capacity to pump 70 to 120 PSI air pressure, you are good to go. The staple gun has a long power cord that allows you to go far and wide without being limited by distance.

Dewalt Finish Stapler

The Dewalt Finish Stapler staple gun is designed to be powered by a compressor with the capacity to provide between 60 and 100 PSI. You can move around easily with this staple gun, because it comes with a long power cord. The housing is constructed from durable metal material. The metal casing protects the motor from damages that are caused by water and debris.

Another advantage is that this staple gun can survive any kind of shock. It only weighs 5.8 pounds, which is light enough for the staple gun to be carried around easily. The package comes with a carrying case and a wrench that can be used to reduce or increase staple depth.

The handle is padded to avoid slippage. Additionally, the trigger is strategically positioned to be near the handle so that you can pull it without straining.

The magazine for holding the staples can store up to 100 staples. You can therefore continue driving staples without the worry of running out. The staple gun works with wires that have crowns of up to 3/8 inches. The staple wires can have a thickness of 18 gauge. The wires can be between 1/4 inches and 1/2 inches wide.

There is a safety pin that prevents the trigger from being pulled unintentionally. Reloading the magazine is simple, as it has a quick release system. There is no area that can’t be reached with this staple gun, because it’s equipped with a long tip.

Features:

  • Cheap
  • Powered by compressor
  • 100 staple magazine capacity
  • Metal housing
  • Weighs 5.8 pounds
  • Carrying case
  • Adjustable staple length

Benefits:

  • Supports gauge 18 wires
  • Supports 1/4 and 1/2 length
  • Safety lock
  • Long tip nozzle
  • Quick release magazine
  • Padded handle
  • Convenience trigger
  • Selectable firing system

Things to be Aware Of:

  • No staple indicator
  • Requires compressor

Verdict:

If you want comfort and efficiency, look no further than the Dewalt Finish Stapler. You can fire hundreds of staples without experiencing any of the jams that are common in ordinary upholstery staplers. No matter how thick your material is, the staple wires will definitely work. As long as it’s connected to a compressor of between 60 and 100 PSI of air pressure, it will do an impressive job.

Although this stapler is relatively cheap, it doesn’t compromise on features. You won’t get injured by stray staples when using this piece of equipment, as it comes with a security lock that prevents unwanted starts. Even if your hands are sweaty, the added handle of the staple gun prevents slippage.